Disclaimer

GENERAL DISCLAIMER

In this web site "First Energy Metals", "we", "us", "our", and the "Company" all refer to First Energy Metals Limited and its subsidiary. First Energy Metals Limited has taken all reasonable care in producing and publishing information contained on this web site and we endeavor to review such information regularly. Material on this web site may still contain technical or other inaccuracies, omissions, or typographical errors, for which First Energy Metals Limited assumes no responsibility. First Energy Metals Limited does not warrant or make any representations regarding the use, validity, accuracy, completeness and reliability of any claims, statements or information on this web site. Under no circumstances, including, but not limited to, negligence, shall First Energy Metals Limited be liable for any direct, indirect, special, incidental, consequential, or other damages, including but not limited to, loss of programs, loss of data, loss of use of computer or other systems, or loss of profits, whether or not advised of the possibility of damage, arising from your use, or inability to use, the material on this web site. This information is not a substitute for independent professional advice before making any investment decisions. Furthermore, you may not modify or reproduce in any form, electronic or otherwise, any information on this web site, except for personal use unless you have obtained our express permission.

THIRD PARTY LINKS

All links or references to other web sites are provided merely as a convenience to the user. First Energy Metals Limited has no control over the linked or referenced web sites, makes no representation or warranty regarding the completeness, accuracy or currency of the information located on the linked or referenced web sites and does not endorse the linked or referenced web sites or their content.

FORWARD-LOOKING STATEMENTS

This web site contains certain statements which may constitute forward-looking statements, such as estimates and statements that describe our future plans, objectives or goals, including words to the effect that we expect or management expects a stated condition or result to occur. Such forward-looking statements are made pursuant to the safe harbor provisions of the United States Private Securities Litigation Reform Act of 1995.

Since forward-looking statements address future events and conditions, by their very nature they involve inherent risks and uncertainties. Actual results relating to, among other things, resources, results of exploration, reclamation and other post-closure costs, capital costs and mine production costs could differ materially from those currently anticipated in such statements by reason of factors such as the productivity of our resource properties, changes in general economic conditions and conditions in the financial markets, changes in demand and prices for minerals, litigation, legislative, environmental and other judicial, regulatory, political and competitive developments in domestic and foreign areas in which we operate, technological and operational difficulties encountered in connection with our exploration activities, labour relations matters, costs and changing foreign exchange rates. This list is not exhaustive of the factors that may affect any of our forward-looking statements. These and other factors should be considered carefully and readers should not place undue reliance on our forward-looking statements.

Further information regarding these and other factors is included in our filings with the US Securities and Exchange Commission (which may be viewed at www.sec.gov) and Canadian provincial securities regulatory authorities (which may be viewed at www.sedar.com).

USE OF INFORMATION

Any information communicated to First Energy Metals Limited through this web site becomes First Energy Metals Limited's exclusive property. First Energy Metals Limited shall be entitled to use any such information for any purpose without restriction or compensation to any person. Such information provided by the user shall be deemed to be non-confidential.

CAUTIONARY NOTE TO U.S. INVESTORS

Cautionary Note to U.S. Investors concerning estimates of Measured and Indicated Resources.
This website may use the terms "measured resources" and "indicated resources." We advise U.S. investors that while such terms are recognized and permitted under Canadian regulations, the U.S. Securities and Exchange Commission does not recognize them. U.S. investors are cautioned not to assume that any part or all of the mineral deposits in these categories will ever be converted into reserves.

Cautionary Note to U.S. Investors concerning estimates of Inferred Resources.
This website may use the terms "inferred resources." We advise U.S. investors that while such term is recognized and permitted under Canadian regulations, the U.S. Securities and Exchange Commission does not recognize it. "Inferred resources" have a great amount of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an inferred mineral resource will ever be upgraded to a higher category. Under Canadian rules estimates of inferred mineral resources may not form the basis of feasibility or other economic studies. U.S. investors are cautioned not to assume that any part or all of an inferred resource exists, or is economically or legally mineable.

S.E.C. Industry GuideNational Instrument 43-101
Reserve: That part of a mineral deposit which could be economically and legally extracted or produced at the time of the reserve determination. The United states Securities and Exchange Commission requires a final or full Feasibility Study to be completed in order to support either Proven or Probable Reserves and does not recognize other classifications of mineralized deposits. Note that for industrial mineral properties, in addition to the Feasibility Study, "sales" contracts or actual sales may be required in order to prove the project's commerciality and reserve status.Mineral Reserve: The economically mineable part of a Measured or Indicated Mineral Resource demonstrated by at least a Preliminary Feasibility study. This study must include adequate information on mining, processing, metallurgical, economic and other relevant factors that demonstrate, at the time of reporting, that economic extraction can be justified.
Proven Reserves: Reserves for which a quantity is computed from dimensions revealed in outcrops, trenches, workings or drill holes; grade and/or quality are computed from the results of detailed sampling and measurement are spaced so closely and the geologic character is so well defined that size, shape, depth and mineral content of reserves are well established.Proven Mineral Reserve: The economically mineable part of a Measured Mineral Resource demonstrated by at least a Preliminary Feasibility study. This study must include adequate information on mining, processing, metallurgical, economic, and other relevant factors that demonstrate, at the time of reporting, that economic extraction is justified.
Probable Reserves: For which quantity and grade and/or quality are computed from information similar to that used for proven reserves, but the sites for inspection, sampling and measurement are farther apart or are otherwise less adequately spaced. The degree of assurance, although lower than that for proven reserves, is high enough to assume continuity between points of observation.Probable Mineral Reserve: The economically mineable part of an indicated, and in some circumstances, a Measured Mineral Resource, demonstrated by at least a Preliminary Feasibility Study. This study must include adequate information on mining, processing, metallurgical, economic and other relevant factors that demonstrate, at the time of reporting, that economic extraction can be justified.

Using definition Standards for Inferred Mineral Resources as published and adopted by the CIM Council on December 11, 2005: "An Inferred Mineral Resource is that part of a Mineral Resource for which quantity and or quality can be estimated on the basis of geological evidence and limited sampling and reasonably assumed, but not verified, geological and grade continuity. The estimate is based on limited information and sampling gathered through appropriate techniques from locations such as outcrops, trenches, pits workings and drill holes."

Noted uncertainties inherent in the definition are clarified by the CIM definition standard "Due to the uncertainty that may be attached to Inferred Mineral Resources, it cannot be assumed that all or any part of an Inferred Mineral Resource will be upgraded to an Indicated or Measured Mineral Resource as a result of continued exploration. Confidence in the estimate is insufficient to allow the meaningful application of technical and economic parameters or to enable an evaluation of economic viability worthy of public disclosure. Inferred Mineral Resources must be excluded from estimates forming the basis of feasibility or other economic studies."

We advise U.S. investors that while these terms are recognized and permitted under Canadian regulations, the U.S. Securities and Exchange Commission does not recognize it. "Inferred mineral resources" have a great amount of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an inferred mineral resource will ever be upgraded to a higher category. Under Canadian rules estimates of inferred mineral resources may not form the basis of feasibility or other economic studies. U.S. investors are cautioned not to assume that any part or all of an inferred resource exists, or is economically or legally mineable.

Disclaimer

    © 2017 First Energy Metals Limited
    All rights reserved.
    Disclaimer

    Subscribe to our Email List